OLIVETTI JP150, 170, 190, 192, 250, 270, 350 360, 370, 450, 470 ,790, 792, 795, 883 XEROX C11
1. Remove the yellow handle when refilling the colour cartridge to reveal the filling holes. (Pull, or lever off using a penknife).
2. Assemble the syringe and filling needle and fill with the appropriate colour ink.
3. Insert the syringe through the appropriate filling hole, (See diagram for filling hole colour) and push into the centre of the cartridge.
Note: The cartridges contain sponge and a slight resistance might be felt.
4. Slowly inject up to 15ml. of ink (Black) or 5ml.(colour). When full some ink may overflow from the filling holes.
5. Unused ink may be returned to the bottle. Clean the syringe with water and dry for future use, or use with a different colour ink.
6. Replace the yellow handle on the colour cartridge.
7. Mount the cartridge and run a priming cycle as per printer instructions.
Note: Empty cartridges should be refilled immediately.