CANON Bubblejet BJ130, BJ300, BJ330, BJC800,
820, 880
EPSON SQ870 / 1170
- Assemble the syringe and filling needle and fill with ink.
- Hold cartridge with the filling hole upwards, insert the tip of the
needle only through the "septum" rubber seal, and inject up to 40ml. of ink.
IMPORTANT:
Insertion too far may puncture the internal bladder
of the cartridge.
- Air bubbles must not be injected into the cartridge as they may cause
irregular printing. If air is introduced it should be withdrawn by careful sucking with
the syringe.
- The cartridge should now be installed to the printer, and is ready
for use.
- Clean the syringe with water and dry for future use, or use with a
different colour ink.
Back to Refill
Instruction Index